By Phone

Our Tech Experts are just a phone call away Call Toll Free:  +1-(855)-xxx-xxxx

Free Problem Diagnostics

Chat Support

24×7 Chat Support from our online technicians.

Free Problem Diagnostics

Email Support

Write to us at and get reply on your Email.

Free Problem Diagnostics


WHAT IS MYWIFIEXT.NET ? is the local web address of Netgear Extender. Local web address means the setting panel saved on the index file of the firmware. When a user access to this web addresses on the web browser then the browser redirect to the index file and it asks for the username and password.

After entered the correct username and password the Netgear Genie page opens up where the setting can be changed.

As is a local web address to access of your netgear range extender where you can make both basic an advance changes and these changes can be in the wireless setting through and you can customize settings according to your needs.

In other words we can say that WWW.MYWIFIEXT.NET is a local web address used to get to the setup page or to open Netgear Smart Wizard on your computer screen for the initial setup of your Netgear Range Extender. So you can say that WWW.MYWIFIEXT.NET is not a regular internet website.

Sometimes when you try to get on for setting up your Netgear Range Extender you might receive an error message which says this site can’t be reached and these can change from browser to browser i.e. error message will be different for internet explorer , different for chrome , different for safari. And this will only open up when you device is either connected physically via Ethernet or wirelessly.

How to reach setup page? is not a website but, its only a local address for your Netgear wireless range extender. By visiting, we would be on the Netgear extender setup page. If, we already have a Netgear extender then, will open a configuration page from where we could change settings if we want to.

Steps to reach setup page.
To access the, we have to follow following steps:

  • Plug the Netgear extender on the power outlet near to your home Wi-Fi router.
  • Put the default IP address of the Netgear extender on the address bar of any web browser.
  • If its not working, try any other web browser
  • Connect an Ethernet cable to connect the desktop and extender.

How To Setup Netgear Wifi Range Extenders :

Netgar range extenders help us to keep desktop, laptop and mobile phones connected with a secured connection. Netgear Mywifiext range extender will help you in providing wifi at extended scope on every corner of your home.

You can use NETGEAR Extenders in two modes; 1st is Extender mode and 2nd is Direct mode. Follow below steps to install NETGEAR WiFi Range Extender as an Direct Mode:

1. Plug your extender.

2. Connect your cell phone to the network of extender.

3. Open your internet browser(Google Chrome ) and go to link.

4. Select new extender setup. Fill the required details.

5. Now genie setup page will open. Select the network type from the available options such as private, home network or public and fill required details.

6. Now, you’re all set to use the extender as an Direct Mode. If you facing any trouble while setting up a WiFi Range Extender, get in touch with our technicians at 1-855-xxx-xxxx. Setup wizard – Common issue facing by customers are :
Can’t find the server at or www.mywifiext. local not working
Unable to setup new netgear extender setup at
Mywifiext or Netgear extender not working need help to fix the issue :  Mywifiext is a local website address to open the setup wizard. This issue is coming when customer tried to setup netgear wireless range extender. The error message comes due to some technical reasons. Through login page you can access the netgear device. To open mywifiext website you need to connect your ethernet cable with extender. To fix all these new extender problems get in touch with our experts.

About Us

At mywifisetup we turn ideas into innovative networking products that connect people, power businesses, and advance the way we live.

We deliver services to customers which are very quick and easy to use. Keeping our customers happy and loyal is everything. As we are dedicated to your success. That’s why we deliver services and tools needed to keep everyone at your residence or office connected, productive and satisfied.

  • Home Security

    Netgear extenders are always made by keeping security in mind. That’s why, we use the Wireless Protected Setup (WPS) to connect the Netgear extender and your home Wi-Fi router.

  • Routers and Switches

    You could save your money and time by using the Netgear extenders and routers. We deliver creative Wi-Fi devices which helps a lot in increasing the Wi-Fi performance.

  • Software Setup

    Software setup is the easiest and quickest way to setup the Netgear wireless range extender. You could easily monitor and maintain your Wi-Fi network easily.

  • Our Team

    We have a team of well qualified and experienced technicians. All the technicians are certified to fix any kind of issue related to your Netgear wireless range extender.

Frequently Asked Questions: Technical Support Help

Installation & Setup

We could setup the Netgear wireless range extender according to the steps given below:

  • We can install the Netgear wireless range extender by using the WPS or web browser setup method.
  • We can always read the instructions on the manual given with the Netgear extender or we are here always to help you.
  • There are certain things which we have to keep in mind during setting up the Netgear extender for first time. We have to make sure that the WN3000RP should be placed in the same room as our router use during the setup process. Once its done, we could place it anywhere we would like to.

As it is going to ensure that your Netgear extender receives good amount of Wi-Fi signals needed in the initial setup process. If it would not be able to receive proper signals from our home router, it would not be able to expand Wi-Fi signals. As we all know, if we are living in medium to large size home then, we know our home router alone is not enough to cover our entire area with strong Wi-Fi. To solve this problem, we could simply install the Netgear wireless range extender at our home. The netgear extender will start boosting the Wi-Fi signals all around our home with increased Wi-Fi signal strength. You can call the technician for online help on +1-(855)-536-0014 and you will be assisted to fix each and every problem you have.

Manage Your Device & Network

what is wireless protected setup (WPS)?

Wireless protected setup is a great feature which help us to easily connect to home wireless network securely. In some of the Netgear extenders models we will see push ‘n’ connect as the wireless protected setup. If we wish to use the WPS, our home router or the other Wi-Fi enabled device must support WPS and should be compatible with WPA security. WPS setup the wireless network name or (SSID) automatically and the security is set according to the security we had applied on our home router. The earlier WPS PIN feature had its own flaws and was no suitable enough. That’s why, the WPS was released which removed all the drawbacks WPS PIN had. With WPS PIN attackers were able to get access of the home Wi-Fi network. If you have any doubt or you feel someone is accessing your home Wi-Fi, you can reach us on the toll free no +1-(855)-536-0014 to remove all such connections from your home Wi-Fi. Our certified technicians will help you to fic each and everything.

Troubleshooting and problem resolution

Improving the wireless connection

Sometimes, the wireless channel that your router or access point (AP) is using, may be experiencing interference from other devices. It does not matter where we are, channels with a particular bandwidth are more prone to interference than others. Interference is caused because of the usage of a common channel by different devices at the same time. For example, a microwave, a 2.4 GHz phone, or a neighbour’s wireless network can cause interference. To fix this issue, we could check which is the least congested channel in the area around our home and by checking that we could setup our home router with that particular channel.

Extender Support

You can reach for the extender support on the toll-free no +1-(855)-536-0014
You could also send us email on
You can also chat with our certified technicians from the right bottom corner of your screen.

To Find The Password For Home Network

In this article Netgear technical support experts has given the directions for Macintosh OS, Windows Vista/Windows 7, Windows XP, Windows 8 and Windows 8.1 and so on. These will help you connect with setup page in no time.

On Mac OS:

  1. Open up Framework Inclinations > System > Air terminal > Arrange
  2. Pick the system you need and tap on the little “Alter” catch and another window flies up with particular data about the System.
  3. Tap on the “Show Secret word” checkbox.
  4. Open browser and type net to make a connection

On Windows Vista/Windows 7:

  1. Go to Network and Sharing Center > Oversee Remote System
  2. Right-tap on the System/SSID
  3. Tap on Properties > Security
  4. Tap on Show character box

On Windows XP:

  1. Tap the “Begin” catch on the lower left-hand corner of the PC screen. This will open the Begin menu.
  2. Tap on the “Run” alternative. The Run order window will show up.
  3. Sort “regedit” into the Run charge window.
  4. Tap the “alright” catch. This will dispatch Windows XP’s Registry Editorial manager.
  5. Extend the “HKEY_CURRENT_USER” registry posting.
  6. Look down and tap on the “Product” section. The “Product” passage will grow.
  7. Look down and find the “Microsoft” name.
  8. Look through the Microsoft name to find the “WZCSVC” name.
  9. Extend the “WZCSVC” name.
  10. Find and extend the “Parameters” name.
  11. Tap on the “Interfaces” name.
  12. Discover the WEP/WPA key inside the “Interfaces” registry to log in to the net portal.
  13. Record the WEP/WPA key and keep it recorded in a protected place for sometime later.

On Windows 8:

  1. From the Begin screen, point to the upper-right corner of the screen, move the pointer down, and afterward tap on Settings.
  2. Tap the remote system symbol.
  3. Right tap on a system name, and after that pick View association properties.
  4. Select Show Characters to see the remote system watchword in order to got to net.

On Windows 8.1:

  1. From the Begin screen, half quart to the lower-right corner of the screen, move the mouse pointer up, and after that tap on Settings.
  2. Tap the system symbol for the system you need to associate with, and afterward tap on Interface.
  3. Swipe on from the correct edge of the screen, and snap Inquiry.
  4. In the inquiry box, enter see organize associations, and in the list items click View arrange associations.
  5. In the System Associations window, press and old or right-tap the system name, and after that snap Status.
  6. Tap on the Remote Properties catch.
  7. Tap the Security tab, and tap the Show characters check box.
  8. The secret word for the remote system is shown in the System security key field.

In the event of any inquiry or unable to go to, contact on Netgear tech to help on our toll free number and connect with experts for specialized help.

What others say about us


“I was happily surprised with my experience! I plan to use them for all my future computer needs!”


“I appreciated being given a range of options, including instruction on how to address my problem on my own.”

Max Milli

“We shall call you again! You took us where we wanted to go without technical language that we don’t want to work with.”

Max Milli
Dr. Dosist

Great communication skills, both verbally and written!”

Dr. Dosist

Quick Assistance for